Proper Care of Your Garage Door

There are many parts of your home to properly maintain. One important part that is often overlooked is the garage door. Did you know that the average garage door goes up and down about a thousand times each year? Fortunately, here are some simple steps to help you take proper care of your garage door.

1. Tighten Hardware

There are many nuts and bolts on your garage door and because it moves, the hardware can loosen over time. An annual inspection should be done on all hardware to see if roller brackets need to be tightened. A garage door opener installation Irvine CA professional can also assist you with properly maintaining your garage door.

2. Inspect Parts for Wear

Your garage might have nylon or steel rollers. A worn nylon roller will likely be cracked or chipped. You should be able to spot a worn steel roller because the wheel will begin to tilt. You can find replacement rollers at a local home improvement store. The lift cable on your garage door should also be inspected for damage. You can use a toothbrush to clean the gunk off the cable; however, do not attempt to replace this part because it is under high tension and needs to be replaced by a professional.

3. Lubricate Moving Parts

Lithium grease is a good product to use on the chain or screw of your garage door. Home improvement stores offer this spray-on product. WD-40 can also be used to lubricate the springs. By lubricating all moving parts annually, you’ll be able to prevent corrosion.

4. Check the Owner’s Manual

Another good idea to properly care for your garage door is to check the owner’s manual. Some garage doors require specific maintenance tasks and it’s helpful to know what needs to be done according to your garage door model.

Properly caring for your garage door is critical in preventing costly repairs. Plan to inspect your garage door each year and consult a garage door professional if you need help replacing or repairing any parts.